Solar Not Working After Blackout | Untapped Energy Solutions
Untapped Energy Solutions

Solar Not Working After a Blackout? Check This First

By Josh Taylor, Untapped Energy Solutions · Published 26 October 2026 · Last updated 26 October 2026

Short answer: if the power has just come back and your solar is off, it's often waiting for the grid to settle. If it stays off, don't climb on the roof. Check what you safely can from the ground, then call a licensed electrician.

Why solar switches off in a blackout

A standard grid-connected solar system is built to shut down when the grid fails, even on a bright day. This protects the people repairing the network, who could be hurt if your panels pushed power back into a line they believe is dead. It's not a fault.

What to check safely, in order

  1. Is the grid really back? Check whether your lights and fridge are working and whether your street has power. If you're still off the grid, the solar will stay off too. Your network's outage information tells you whether the area is still down. For most of South East Queensland that's Energex.
  2. Give it a few minutes. Inverters wait for stable grid power before they reconnect, so a short delay after power returns is normal.
  3. Look at the display or app. Note any error message or code, or a message such as "grid fault" or "no grid". A photo helps your electrician.
  4. Look at the switchboard, without opening anything. If a safety switch or the solar breaker has tripped, you can switch it back on once, but only if the board is dry, undamaged and you're comfortable doing it. If it trips again, stop.
  5. Check the monitoring. If the app shows the inverter offline but the display is on, the Wi-Fi may have dropped. Restarting your router is safe to try.

What not to do

A worked example

This is an illustration, not a real job. A storm takes out your street's power at 2pm on a sunny day. Your lights go off, and so does your solar, because the inverter shuts down when the grid does. At 5pm the power returns. The lights come on, but the app still shows nothing.

Walk through the steps. You wait five minutes, and the inverter's display lights up and shows it's reconnecting. Within a few minutes it's generating again. That's the normal outcome.

Now change one thing: the display shows a fault code, and your safety switch has tripped. You reset it once and it trips again. That tells you something on the circuit needs looking at. Stop there, photograph the fault code and call a licensed electrician. Resetting it again and again can be unsafe.

When to call a licensed electrician

If your installer is no longer around, any licensed electrician can inspect it.

Can solar ever work in a blackout?

Not on its own. To keep your home running in an outage, you need a backup-capable inverter and battery, wired and commissioned for it. That's only available on suitable systems, and many home batteries are set up just to cut your evening bill and will not run the house in an outage. Backup can cover selected circuits, such as the fridge, lights and internet, or on some systems the whole home. If this matters to you, read our guide to battery for blackouts and our bills versus blackouts guide.

If you're considering a battery, there's also the rebate to think about. There's no Queensland state battery rebate, but the federal Cheaper Home Batteries rebate steps down on 1 January 2027, and the rate is set by the date the battery is installed and certified. See our battery rebate page and home battery page.

Book a free design with Untapped Energy Solutions

If you want to know whether your system could run through the next outage, we'll tell you honestly, with no pressure.

We're available around 7am to 5pm, Monday to Friday. Message us any time and we'll reply on the next business day.

Solar after a blackout: frequently asked questions

Why is my solar not working after a blackout?

Grid-connected solar switches off when the grid goes down, even in full sun. That's a safety feature. Once the power is back and stable, a working inverter normally restarts by itself after a short delay.

How long does solar take to restart after power returns?

Usually a few minutes, because the inverter waits for the grid to be stable before it reconnects. If it hasn't restarted after the power has been back for a good while, check the display or app for an error and call a licensed electrician.

Is it safe to reset my solar inverter?

Only in simple ways. Check the display or app and, if a safety switch or breaker has tripped, you can switch it back on once if it's dry and you're comfortable. Don't open the inverter, touch cabling or go on the roof. If it trips again or shows a fault, call a licensed electrician.

Will solar panels still power my house in a blackout?

No, not on their own. A standard grid-connected system shuts down in an outage. Backup only works on suitable systems with a backup-capable inverter and battery that were designed and commissioned for it.

What should I do if my panels or cables were damaged in the storm?

Stay off the roof and keep away from damaged panels or cables, which can still be live in daylight. Call a licensed electrician. If a power line is down, stay clear and call emergency services.

Read our reviews or head back to the Untapped Energy Solutions homepage.

Untapped Energy Solutions · Licensed electrician ECL 90006 · 30-year workmanship warranty · 33 five-star Google reviews

Your power.

General information only. If you're unsure about any electrical fault, call a licensed electrician. Backup is available on suitable systems.